產品中心

Products

SLX1-40/1-A

SLX1 series power lightning protection box

kinds of function

1) voltage limiting type or switch port design.
2) comply with T1 or T2 test conditions.
3) overheated inside device and over-current protection .
4) has a device with indicating working state ,has alarm function for lack of phase and earth connection and failure of lighting protection.
5) alarm contact, realize function of remote communication.
6) intelligent recording lightning and surge frequency, convenient for statistics, analysis and assessment of risk.
7) SPD modular structure design, convenient for maintenance.
8) lightning protection box adopts design of three prevention, suitable for different installation environment.

name schedule



technical prarmeters

rated operational voltage Uopv(V) 220(1N50Hz)   
Maximum continuous operating voltage Ucpv(V) 385
Nominal discharge current In(kA)) 20
Maximum discharge current Imax(kA)) 40
impact current limp(kA)
Rated load current IL(A)
protection mood L/N-PE

Voltage protection level Up(kV)

1.8
Lightning counter can be chosen
Remote control alarm yes
protection class of body IP50

connection method




Structure diagram



working principle



installation


Installation: confirm those issues before installation:

1、inspection system is connected to the single-phase or three-phase configuration, and ensure that the rated voltage protection marked rated voltage of a system and the nameplate match.
2、the reference line connection graph (see Figure)
3、before the installation of surge protection device, turn off the power.
4、surge protector does not contain a direction components, can be reversed or inclined. In order to facilitate the reading on the shell, lightning protection box can be rotated 180 degrees. Forbidden to open the shell, in order to avoid damaging the indicating lamp and a circuit board.
5、check casing screw, ensure that have been tightened, because the transport process may cause loose.
6、installation wiring and parts wiring: of surge protective device installation should use wires as short as possible. The wire should be tied together, in order to reduce the inductance.
7、surge protector of L terminal phase respectively in the corresponding connecting; surge protection N terminal device and the corresponding line connected; ground surge protection PE terminal is connected with the corresponding. Error connecting to cause a surge protector damage and danger".

comments


can be designed and made according to clients' special requiremnets

Related Products

Committed to providing users with high-quality solutions. If you have any questions or need more information, please feel free to contact us!
河南快35 瑞波币价格今日行情走势分析 泉州体育彩票中心官网 快乐12助手怎么样 11选5投注技巧 四川快乐12走势图定牛 KY开元棋牌怎么控制输赢 手机单机梭哈 彩票平台赚钱1000万 买河南快3 足彩胜负彩开奖结果及奖金查询 百家乐网页游戏_Welcome 排列三走势图助手 球探手机足球比分app ag捕鱼王3d点射 水果拉霸2 时时彩开奖直播